This chapter deals with modeling, simulation, and implementation problems encountered in robotic manufacturing control systems. Extended Petri nets are adopted as a prototyping tool for expressing real-time control of robotic systems and a systematic method based on hierarchical Petri nets is described for their direct implementation. A coordination mechanism is introduced to coordinate the event activities of the distributed machine controllers through friability tests of shared global transitions. The proposed prototyping method allows a direct coding of the inter-task cooperation by robots and intelligent machines from the conceptual Petri net specification, so that it increases the traceability and the understanding of the control flow of a parallel application specified by a net model. This approach can be integrated with off-the-shelf real-time executives. Control software using multithreaded programming is demonstrated to show the effectiveness of the proposed method.
Top1. Introduction
Complex robotic systems such as flexible manufacturing systems require sophisticated distributed real-time control systems. A major problem concerns the definition of the user tasks and the cooperation between the subsystems, especially since the intelligence is distributed at a low level (machine level). Controlling such systems generally requires a hierarchy of control units corresponding to several abstraction levels. At the bottom of the hierarchy, i.e. machine control level, are the programmable logic controllers (PLC). The next level performs coordination of the PLCs. The third level implements scheduling, that is, the real-time assignments of workpieces and tools to machines. At the machine level, PLCs perform local logical control operations of flexible, modular, high-speed machines through the use of multiple independent drives (Holding, et al. 1992). Implementation languages can be based on ladder diagrams or more recently state machines (Silva, et al. 1982). However, when the local control is of greater complexity, the above kinds of languages may not be well adapted. The development of industrial techniques makes a sequential control system for robotic manufacturing systems larger and more complicated one, in which some subsystems operate concurrently and cooperatively (Neumann, 2007).
In the area of real-time control of discrete event robotic systems the main problems that the system designer has to deal with are concurrency, synchronization, and resource sharing problems. Presently, the implementation of such control systems makes a large use of microcomputers. Real-time executives are available with complete sets of synchronization and communication primitives. However, coding the specifications is a hazardous work and debugging the implementation is particularly difficult when the concurrency is important. It is important to have a formal tool powerful enough and allowing developing validation procedures before implementation. Conventional specification languages do not allow an analytical validation. Consequently, the only way to validate is via simulation and step by step debugging. On the other hand, a specification method based on a mathematical tool may be more restricting, but analytical procedures can strongly reduce the simulation step. Rapid prototyping is an economical and crucial way to experiment, debug, and improve specifications of parallel applications. Increasing complexity of synchronizing mechanisms involved in concurrent system design makes necessary a prototyping step starting from a formal, already verified model. Petri nets allow to validate and to evaluate a model before its implementation. The formalism allowing a validation of the main properties of the Petri net control structure (liveness, boundedness, etc.) guarantees that the control system will not fall immediately in a deadlocked situation. In the field of flexible manufacturing cells, the last aspect is essential because the sequences of control are complex and change very often.