Journal Contents: International Journal of Measurement Technologies and Instrumentation Engineering (IJMTIE)

Saeed Q. Al-Khalidi Al-Maliki (College of Business, King Khalid University, Abha, Saudi Arabia)

Sami D. Alaruri (Independent Scholar, Washington, USA)

Sami D. Alaruri (Independent Scholar, Washington, USA)

Ketavath Kumar Naik (KLEF, KL University, India)

Abdelkrim Mohrem (Research Laboratory on the Electrification of Industrial Enterprises, University M'Hamed Bougara, Boumerdes, Algeria), Boukhemis Chetate (Research Laboratory on the Electrification of Industrial Enterprises, University M'Hamed Bougara, Boumerdes, Algeria), Houssem Eddine Guia (Research Laboratory on the Electrification of Industrial Enterprises, University M'Hamed Bougara, Boumerdes, Algeria)

Sami D. Alaruri (Independent Scholar, USA)

Ketavath Kumar Naik (KLEF, KL University, Guntur, India), Ravi Kumar Palla (GMRIT, Rajam, India), Sriram Sandhya Rani (Jayamukhi Institute of Technological Sciences, India), Dattatreya Gopi (KL University, Guntur, India)

Madan Kumar Sharma (Rajasthan Technical University Kota, Rajasthan, India), Mithilesh Kumar (Rajasthan Technical University Kota, Rajasthan, India), J.P. Saini (N.S.I.T., Delhi, India)

Sami D. Alaruri (Independent Scholar, Mill Creek, USA)

Srinivasareddy Putluri (Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Guntur, India), Shaik Yasmin Fathima (Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Guntur, India)

Avi Karsenty (Lev Academic Center, Faculty of Engineering, Department of Applied Physics/Electro-Optics Engineering, Jerusalem, Israel), Shmuel Feldman (Lev Academic Center, Faculty of Engineering, Department of Applied Physics/Electro-Optics Engineering, Jerusalem, Israel), Zvi Veig (Lev Academic Center, Faculty of Engineering, Department of Applied Physics/Electro-Optics Engineering, Jerusalem, Israel), Yoel Arieli (Lev Academic Center, Faculty of Engineering, Department of Applied Physics/Electro-Optics Engineering, Jerusalem, Israel)

Andreia de Lima Fioravante (Inmetro, Duque de Caxias, Brazil), Cristiane Rodrigues Augusto (Inmetro, Duque de Caxias, Brazil), Valnei Smarçaro da Cunha (Inmetro, Duque de Caxias, Brazil), Luiz Antonio d'Avila (TPQB/EQ/UFRJ, Rio de Janeiro, Brazil)

Irem Sanal (Bahcesehir University, Istanbul, Turkey)

Grzegorz Dobiński (University of Lodz, Lodz, Poland), Sławomir Pawłowski (University of Lodz, Lodz, Poland), Marek Smolny (University of Lodz, Lodz, Poland)

Avi Karsenty (Department of Applied Physics/Electro-Optics Engineering, Faculty of Engineering, Lev Academic Center, Jerusalem, Israel), Yaron Lichtenstadt (Department of Applied Physics/Electro-Optics Engineering, Faculty of Engineering, Lev Academic Center, Jerusalem, Israel), Sagi Naeim (Department of Applied Physics/Electro-Optics Engineering, Faculty of Engineering, Lev Academic Center, Jerusalem, Israel), Yoel Arieli (Department of Applied Physics/Electro-Optics Engineering, Faculty of Engineering, Lev Academic Center, Jerusalem, Israel)

A.S.C.S.Sastry (Department of Electronics and Communication Engineering, K.L. University, Andhra Pradesh, India), P.V.V.Kishore MIEE (Department of Electronics and Communication Engineering, K.L. University, Andhra Pradesh, India), Ch.Raghava Prasad (Department of Electronics and Communication Engineering, K.L. University, Andhra Pradesh, India), M.V.D.Prasad (Department of Electronics and Communication Engineering, K.L. University, Andhra Pradesh, India)

A. Anbarasi (Rajalakshmi Engineering College, Thandalam, India), R. Kalpana (Rajalakshmi Engineering College, Thandalam, India), A. Arivarasan (Centre for Nanoscience and Technology, Anna University, Chennai, India), R. Jayavel (Centre for Nanoscience and Technology, Anna University, Chennai, India), B. Venkataraman (RSD, Kalpakkam, India)

Nitish Datta (Department of Economics, University of Kalyani, West Bengal, India)

N. Aouabdia (Laboratoire de Microsystèmes et Instrumentation, Université Constantine1, Constantine, Algeria), N. E. Belhadj-Tahar (Sorbonne Universités, Paris, France), Georges. Alquié (Sorbonne Universités, Paris, France)

K. Vinoth Kumar (Department of Electrical and Electronics Engineering, School of Electrical Sciences, Karunya University, Coimbatore, India), S. Suresh Kumar (Department of Electronics and Communication Engineering, Dr. NGP Institute of Technology, Coimbatore, India), A. Immanuel Selvakumar (Department of Electrical and Electronics Engineering, School of Electrical Sciences, Karunya University, Coimbatore, India)

Nazila Aghayi (Department of Mathematics, Ardabil Brach, Islamic Azad University, Ardabil, Iran), Samira Salehpour (Young Researchers and Elite Club, Ardabil Branch, Islamic Azad University, Ardabil, Iran)

Natwaine Sherune Gardner (Biotechnology Centre, UWI Mona, Kingston, Jamaica), Kedon JS Luke (UWI Mona, Kingston, Jamaica), Andrew O. Wheatley (UWI Mona, Kingston, Jamaica), Winston G. De La Haye (UWI Mona, Kingston, Jamaica), Perceval Bahado-Singh (UWI Mona, Kingston, Jamaica), Lowell Dilworth (Department of Pathology, UWI Mona, Kingston, Jamaica), Donovan A. McGrowder (Department of Pathology, Faculty of Medical Sciences, UWI Mona, Kingston, Jamaica), Everard Barton (UWI Mona, Kingston, Jamaica), Lauriann Elizabeth Young (Department of Basic Medical Sciences, Faculty of Medical Sciences, UWI Mona, Kingston, Jamaica), Ajibike Salako-Akande (Getwele Natureceuticals, Halethorpe, MD, USA), Errol Morrison (NCST, Kingston, Jamaica), Denise Eldemire-Shearer (Department of Community health, UWI Mona, Kingston, Jamaica), Henry Lowe (Bio-Tech R&D Institute, Kingston, Jamaica), Helen N. Asemota (Biotechnology Centre, UWI Mona, Kingston, Jamaica and UWI BMS - Biochemistry Section, Mona, Jamaica)

Ram Pratap Sinha (Government College of Engineering and Leather Technology, Kolkata, India), Nitish Datta (Department of Economics, University of Kalyani, Nadia, India)

Sandra D'Souza (Research Scholar, SCSVMV University, Kanchipuram, Tamil Nadu, India & Department of Instrumentation and Control Engineering, Manipal Institute of Technology (M.I.T), Manipal, Karnataka, India), N. Sriraam (Centre for Medical Electronics and Computing, M.S. Ramaiah Institute of Technology, Bangalore, Karnataka, India)

Andrea Mariscotti (DITEN, University of Genova, Genova, Italy)

Abhay Kumar Singh (Department of Electrical and Electronics, Sikkim Manipal Institute of Technology, Sikkim, India), Shabbiruddin (Department of Electrical and Electronics, Sikkim Manipal Institute of Technology, Sikkim, India)

F. M. Tshizanga (Institut Supérieur de Techniques Appliquées, Kinshasa, Congo & Département de Physique, Université Pédagogique Nationale, Binza, Kinshasa, Congo), P. M. Badibanga (Département de Physique, Université de Kinshasa, Lemba, Kinshasa, Congo), B. B. Ntampaka (Département de Physique, Université Pédagogique Nationale, Binza, Kinshasa, Congo)

Nisha Rajappan (Department of Instrumentation, Cochin University of Science and Technology, Cochin, India), K.N. Madhusoodanan (Department of Instrumentation, Cochin University of Science and Technology, Cochin, India)

N. Aouabdia (Laboratoire Microsystème et Instrumentation, Université Mentouri Constantine, Constantine, Algeria), N. E. Belhadj-Tahar (Sorbonne Universités, Paris, France), G. Alquie (Sorbonne Universités, Paris, France)

Sergio Casciaro (National Research Council, Institute of Clinical Physiology, Lecce, Italy), Maria Daniela Renna (National Research Council, Institute of Clinical Physiology, Lecce, Italy), Paola Pisani (National Research Council, Institute of Clinical Physiology, Lecce, Italy), Antonio Greco (Echolight S.r.l., Lecce, Italy), Francesco Conversano (National Research Council, Institute of Clinical Physiology, Lecce, Italy), Maurizio Muratore (O.U. of Rheumatology, “Galateo” Hospital, San Cesario di Lecce, ASL-LE, Lecce, Italy)

Maurizio Muratore (O.U. of Rheumatology, “Galateo” Hospital, San Cesario di Lecce, ASL-LE, Lecce, Italy), Francesco Conversano (National Research Council, Institute of Clinical Physiology, Lecce, Italy), Maria Daniela Renna (National Research Council, Institute of Clinical Physiology, Lecce, Italy), Paola Pisani (National Research Council, Institute of Clinical Physiology, Lecce, Italy), Valeria Villani (Echolight S.r.l., Lecce, Italy), Sergio Casciaro (National Research Council, Institute of Clinical Physiology, Lecce, Italy)

Sami D. Alaruri (Independent Scholar, Uniontown, OH, USA)

Christian Viehweger (Technische Universität Chemnitz, Chemnitz, Germany), Thomas Keutel (Technische Universität Chemnitz, Chemnitz, Germany), Laura Kasper (Technische Universität Chemnitz, Chemnitz, Germany), Tim Pfeifer (Technische Universität Chemnitz, Chemnitz, Germany), Olfa Kanoun (Technische Universität Chemnitz, Chemnitz, Germany)

S. Ikezawa (Department of Production and Systems, Graduate School of Information, Waseda University, Fukuoka, Japan), T. Ueda (Department of Production and Systems, Graduate School of Information, Waseda University, Fukuoka, Japan)

Gaetano Battistella (ISPRA Task Force supporting IMELS’ IPPC Licensing Committee, Rome, Italy), Giuseppe Di Marco (ISPRA Task Force supporting IMELS’ IPPC Licensing Committee, Rome, Italy)

Rémi Suaire (Regional Laboratory of Civil Engineering Nancy (LRPC Nancy), CÉTÉ de l'Est, Tomblaine, France), Ivana Durickovic (Regional Laboratory of Civil Engineering Nancy (LRPC Nancy), CÉTÉ de l'Est, Tomblaine, France), Marie-Odile Simonnot (Reactions Laboratory and Process Engineering (LRGP), CNRS, University of Lorraine, Vandoeuvre, France), Mario Marchetti (Regional Laboratory of Civil Engineering Nancy (LRPC Nancy), CÉTÉ de l'Est, Tomblaine, France)

A. Cocozza (Department of Engineering for Innovation, University of Salento, Lecce, Italy), A. Ficarella (Department of Engineering for Innovation, University of Salento, Lecce, Italy)

Vassiliki Koufi (Department of Digital Systems, University of Piraeus, Piraeus, Greece), Flora Malamateniou (Department of Digital Systems, University of Piraeus, Piraeus, Greece), George Vassilacopoulos (Department of Digital Systems, University of Piraeus, Piraeus, Greece)

Konstantinos Perakis (Biomedical Engineering Laboratory, National Technical University of Athens, Athens, Greece), Kostas Giokas (Biomedical Engineering Laboratory, National Technical University of Athens, Athens, Greece), Dimitra Iliopoulou (Biomedical Engineering Laboratory, National Technical University of Athens, Athens, Greece), Dimitris Koutsouris (Biomedical Engineering Laboratory, National Technical University of Athens, Athens, Greece)

Vasyl Prydatko (BioticGIS Modelling Group, International Association Ukrainian Land and Resources Management Center, Kyiv, Ukraine), Grygoriy Kolomytsev (I.I. Schmalhausen Institute of Zoology of National Academy of Sciences of Ukraine, Kyiv, Ukraine)

Tomas Gabriel Bas (Faculty of Engineering and Science, Business School, University Adolfo Ibañez, Santiago, Chile)

A.L. Fioravante (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), E.F. Guimarães (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil & Department of Chemistry, Military Institute of Engineering (IME), Rio de Janeiro, RJ, Brazil), F.B. Gonzaga (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), C.M. Ribeiro (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), S.P. Sobral (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), J.C. Lopes (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), I.C.S. Fraga (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), C.R. Augusto (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), E.C.S. Elias (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), C.C. Ribeiro (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), D.C.G.S. Teixeira (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), E.C.P. Rego (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), L.M. Oliveira (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), E.B. Santana (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), L.A. Neves (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), R.R.R. Almeida (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), J.D. Figueroa-Villar (Department of Chemistry, Military Institute of Engineering (IME), Rio de Janeiro, RJ, Brazil), R.C. Sena (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), M.A. Dominguez (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), J.M. Rodrigues (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil), V.S. Cunha (Chemical Metrology Division, Scientific and Industrial Metrology Directorate, National Institute of Metrology, Quality and Technology (Inmetro), Duque de Caxias, RJ, Brazil)

Dhirendra Pratap Singh (Department of Electronics & Communication Engineering, Shri Ramswaroop Memorial Group of Professional Colleges, Lucknow, Uttar Pradesh, India), Vikrant Bhateja (Department of Electronics & Communication Engineering, Shri Ramswaroop Memorial Group of Professional Colleges (SRMGPC), Lucknow, Uttar Pradesh, India), Surender Kumar Soni (Department of Electronics & Communication Engineering, National Institute of Technology (NIT), Hamirpur, Himachal Pradesh, India)

A. Lay-Ekuakille (Department of Innovation Engineering, University of Salento, Lecce, Italy), G. Griffo (Department of Innovation Engineering, University of Salento, Lecce, Italy), D. Pellicanò (Department of Innovation Engineering, University of Salento, Lecce, Italy), P. Maris (Department of Civil Engineering, Energy, Environment and. Materials (DICEAM), University “Mediterranea” of Reggio Calabria, Reggio Calabria, Italy), M. Cacciola (Department of Civil Engineering, Energy, Environment and. Materials (DICEAM), University “Mediterranea” of Reggio Calabria, Reggio Calabria, Italy)

Vikrant Bhateja (Department of Electronics and Communication Engineering, Shri Ramswaroop Memorial Group of Professional Colleges (SRMGPC), Lucknow, Uttar Pradesh, India), Rishendra Verma (Department of Electronics and Communication Engineering, Shri Ramswaroop Memorial Group of Professional Colleges (SRMGPC), Lucknow, Uttar Pradesh, India), Rini Mehrotra (Department of Electronics and Communication Engineering, Shri Ramswaroop Memorial Group of Professional Colleges (SRMGPC), Lucknow, Uttar Pradesh, India), Shabana Urooj (Department of Electrical Engineering, School of Engineering, Gautam Buddha University, Greater-Noida, Uttar Pradesh, India)

Chukwuemeka R. Nwokocha (Department of Basic Medical Sciences, University of the West Indies, Mona, Jamaica), Novie Younger-Coleman (Tropical Metabolism Research Institute, University of the West Indies, Mona, Jamaica), Magdalene Nwokocha (Department of Heamatology, University of the West Indies, Mona, Jamaica), Daniel U. Owu (Department of Physiology, University of Calabar, Calabar, Nigeria), Helen Asemota (Department of Basic Medical Sciences, University of the West Indies, Mona, Jamaica), Moses Iwuala (Department of Biotechnology, Federal University of Technology, Owerri, Nigeria), Aimé Lay-Ekuakille (Department of Innovation Engineering, University of Salento, Lecce, Italy)

D. Sathish Kumar (Anna University Chennai, Chennai, Tamil Nadu, India), N. Nagarajan (Coimbatore Institue of Engineering and Technology, Coimbatore, Tamil Nadu, India), S. Asifa Begum (Nehru Institute of Technology, Coimbatore, Tamil Nadu, India)

G. Griffo (Department of Innovation Engineering, University of Salento, Lecce, Italy), P. Vergallo (Department of Innovation Engineering, University of Salento, Lecce, Italy)

Biagio Cammaroto (Environmental and Applied Mathematics, University of Messina, Messina, Italy), Matteo Cacciola (Department of Civil, Energy, Environmental, and Mechanical Engineering, Mediterranea University of Reggio Calabria, Reggio Calabria, Italy), Mario Versaci (Department of Civil, Energy, Environmental, and Mechanical Engineering, Mediterranea University of Reggio Calabria, Reggio Calabria, Italy)

Antonio Celesti (Universita' di Messina, Messina, Italy), Maria Fazio (Universita' di Messina, Messina, Italy), Antonio Puliafito (Universita' di Messina, Messina, Italy), Massimo Villari (Universita' di Messina, Messina, Italy)

Swati S. Godbole (G. H. Raisoni College of Engineering, Nagpur, Maharashtra, India), Sanjay B. Pokle (Department of Electronics & Communication Engineering, Rashtrasant Tukadoji Maharaj Nagpur University, Nagpur, Maharashtra, India)

S. Chattopadhyay (Department of Electrical Engineering, National Institute of Technical Teachers' Training and Research, Kolkata, West Bengal, India), M. Bandyopadhyay (Department of Electrical Engineering, Gandhi Institute for Education and Technology, BBSR Baniatangi, Bhubaneswar, Odisha, India)

David Camarero (University of Balearic Islands, Spain), Manal Lagziri (University of Balearic Islands, Spain), Kay Suenaga (University of Balearic Islands, Spain), Rodrigo Picos (University of Balearic Islands, Spain), Eugeni Garcia-Moreno (University of Balearic Islands, Spain)

Nitin K. Mandavgade (G.H. Raisoni College of Engineering & Priyadarshini College of Engineering, Nagpur, India), S. B. Jaju (G.H. Raisoni College of Engineering, India), R. R. Lakhe (Shreyas Quality Management System, India)

S. Yasmin Fathima (Vasireddy Venkatadri Institute of Technology - Guntur, India), G. V. S. Karthik (Coimbatore Institute of Technology, India), M. Zia Ur Rahman (Kallam Haranadhareddy Institute of Technology - Guntur, India), A. Lay-Ekuakille (University of Salento, Italy)

Mikko Paukkunen (Aalto University, Finland), Matti Linnavuo (Aalto University, Finland), Helena Haukilehto (Aalto University, & Emergency & Medical Assistance Group, Finland), Raimo Sepponen (Aalto University, Finland)

Viliam Patoprsty (Slovak Institute of Metrology, Slovakia), Miroslava Valkova (Slovak Institute of Metrology, Slovakia)

Lochi Yu (Escuela de Ingenieria Electrica, Universidad de Costa Rica, San Pedro, San Jose, Costa Rica), Cristian Ureña (Escuela de Ingenieria Electrica, Universidad de Costa Rica, San Pedro, San Jose, Costa Rica)

Matteo Cacciola (Department of Civil, Energy, Environmental and Materials Engineering, University “Mediterranea” of Reggio Calabria, Reggio Calabria, Italy), Salvatore Calcagno (Department of Civil, Energy, Environmental and Materials Engineering, University “Mediterranea” of Reggio Calabria, Reggio Calabria, Italy), Filippo Laganà (Department of Health Sciences, University "Magna Graecia" of Catanzaro, Italy), Francesco Carlo Morabito (Department of Civil, Energy, Environmental and Materials Engineering, University “Mediterranea” of Reggio Calabria, Reggio Calabria, Italy), Diego Pellicanò (Department of Civil, Energy, Environmental and Materials Engineering, University “Mediterranea” of Reggio Calabria, Reggio Calabria, Italy), Isabella Palamara (Department of Civil, Energy, Environmental and Materials Engineering, University “Mediterranea” of Reggio Calabria, Reggio Calabria, Italy), Mario Versaci (Department of Civil, Energy, Environmental and Materials Engineering, University “Mediterranea” of Reggio Calabria, Reggio Calabria, Italy)

Pasquale Maris (School of Biomedical Engineering, University “Magna Graecia”, Catanzaro, Italy), Matteo Cacciola (Department of Civil, Energy, Environmental and Materials Engineering, University “Mediterranea” of Reggio Calabria, Reggio Calabria, Italy), Filippo Laganà (School of Biomedical Engineering, University “Magna Graecia”, Catanzaro, Italy), Diego Pellicanò (Department of Civil, Energy, Environmental and Materials Engineering, University “Mediterranea” of Reggio Calabria, Reggio Calabria, Italy)

Mateusz Kotarski (Faculty of Electronics, Telecommunications and Informatics, Gdansk University of Technology, Gdansk, Poland), Janusz Smulko (Faculty of Electronics, Telecommunications and Informatics, Gdansk University of Technology, Gdansk, Poland)

Gourav Jain (Center for Development of Telematics, Bengaluru, India), Shaik Rafi Ahamed (Department of E.E.E., Indian Institute of Technology, Guwahati, India)

Sami D. Alaruri (Independent Scholar, Uniontown, OH, USA)

E. De Franchis (Department of Environmental and Biological Sciences and Technologies, University of Salento, Lecce, Italy & Hospital “F. Ferrari”, Casarano, Italy), A. Ferramosca (B. Department of Environmental and Biological Sciences and Technologies, University of Salento, Lecce, Italy), V. Zara (Department of Environmental and Biological Sciences and Technologies, University of Salento, Lecce, Italy), L. Piper (Department of Management, Economics, Mathematics and Statistics, University of Salento, Lecce, Italy)

N. K. Mandavgade (G. H. Raisoni College of Engineering, Nagpur, India), S. B. Jaju (G. H. Raisoni College of Engineering, Nagpur, India), R. R. Lakhe (Shreyas Quality Management System, Nagpur, India), D. J. Tidke (G. H. Raisoni College of Engineering, Nagpur, India)

Karunamoy Chatterjee (Department of Electronics & Communication Engineering, Bankura Unnayani Institute of Engineering, Bankura, India), Sankar Narayan Mahato (Department of Electrical Engineering National Institute of Technology, Durgapur, Burdwan, India), Subrata Chattopadhyay (Department of Electrical Engineering, National Institute of Technical Teachers Training & Research-Kolkata, Kolkata, India)

Matteo Cacciola (Department of Civil Engineering, Energy, Environment and Materials, “Mediterranea” University of Reggio Calabria, Reggio Calabria, Italy), Salvatore Calcagno (Department of Civil Engineering, Energy, Environment and Materials, “Mediterranea” University of Reggio Calabria, Reggio Calabria, Italy), Filippo Laganà (Department of Civil Engineering, Energy, Environment and Materials, “Mediterranea” University of Reggio Calabria, Reggio Calabria, Italy), Francesco Carlo Morabito (Department of Civil Engineering, Energy, Environment and Materials, “Mediterranea” University of Reggio Calabria, Reggio Calabria, Italy), Diego Pellicanò (Department of Civil Engineering, Energy, Environment and Materials, “Mediterranea” University of Reggio Calabria, Reggio Calabria, Italy), Isabella Palamara (Department of Civil Engineering, Energy, Environment and Materials, “Mediterranea” University of Reggio Calabria, Reggio Calabria, Italy), Mario Versaci (Department of Civil Engineering, Energy, Environment and Materials, “Mediterranea” University of Reggio Calabria, Reggio Calabria, Italy), Biagio Cammaroto (Department of Civil Engineering, University of Messina, Messina, Italy)

Shabana Urooj (Department of Electrical Engineering, School of Engineering, Gautam Buddha University, Greater Noida, UP, India), Athar Hussain (Netaji Subhas University of Technology, India), Narayani Srivastava (Department of Electrical Engineering, School of Engineering, Gautam Buddha University, Greater Noida, UP, India)

Sami D. Alaruri (Independent Scholar, Uniontown, OH, USA)

Matteo Cacciola (DICEAM Department, University of Reggio Calabria, Reggio Calabria, Italy), Salvatore Calcagno (DICEAM Department, University of Reggio Calabria, Reggio Calabria, Italy), Fabio La Foresta (DICEAM Department, University of Reggio Calabria, Reggio Calabria, Italy), Mario Versaci (DICEAM Department, University of Reggio Calabria, Reggio Calabria, Italy)

Andrea Mariscotti (DITEN, University of Genova, Genova, Italy)

L. Mescia (DEI-Dipartimento di Ingegneria Elettrica e dell’Informazione, Polytechnic University of Bari, Bari, Italy), O. Losito (DEI-Dipartimento di Ingegneria Elettrica e dell’Informazione, Polytechnic University of Bari, Bari, Italy), V. Castrovilla (ITEL Telecomunicazioni S.r.l., Ruvo di Puglia, Italy), P. Bia (DEI-Dipartimento di Ingegneria Elettrica e dell’Informazione, Polytechnic University of Bari, Bari, Italy), F. Prudenzano (DEI-Dipartimento di Ingegneria Elettrica e dell’Informazione, Polytechnic University of Bari, Bari, Italy)

Denis Juma (Tshwane University of Technology, South Africa), Bessie Monchusi (Tshwane University of Technology, South Africa), Josiah Munda (Tshwane University of Technology, South Africa), Adisa Jimoh (Tshwane University of Technology, South Africa)

Hermes Hernández (Universidad Panamericana, Mexico), Ramiro Velázquez (Universidad Panamericana, Mexico)

Hrvoje Hegeduš (University of Zagreb, Republic of Croatia), Marko Jurcevic (University of Zagreb, Republic of Croatia), Roman Malaric (University of Zagreb, Republic of Croatia)

M. G. De Giorgi (University of Salento, Italy), A. Ficarella (University of Salento, Italy), M. Tarantino (University of Salento, Italy)

Alessandro Massaro (Italian Institute of Technology (IIT) , Center for Bio-Molecular Nanotechnologies (CBN), Italy), Fabrizio Spano (Italian Institute of Technology (IIT) , Center for Bio-Molecular Nanotechnologies (CBN), Italy), Diego Caratelli (Delft University of Technology, The Netherlands), Alexander Yarovoy (Delft University of Technology, The Netherlands), Roberto Cingolani (Italian Institute of Technology (IIT), Italy), Athanassia Athanassiou (Italian Institute of Technology (IIT), Center for Bio-Molecular Nanotechnologies (CBN), Italy)

Anthony Psaltis (National and Kapodistrian University of Athens, Greece), Constantinos Mourlas (National and Kapodistrian University of Athens, Greece)

Rym Chéour (National School of Engineers of Sfax, Tunisia), Sébastien Bilavarn (University of Nice-Sophia Antipolis, France), Mohamed Abid (National School of Engineers of Sfax, Tunisia)

Ireneusz Jablonski (Wroclaw University of Technology, Poland), Kamil Subzda (Wroclaw University of Technology, Poland), Janusz Mroczka (Wroclaw University of Technology, Poland)

Shabana Urooj (Gautam Buddha University, India), M. Khan (Jamia Millia Islamia, India), A. Q. Ansari (Jamia Millia Islamia, India)

Leila Kheroua (Université des Sciences et de la Technologie Houari Boumediene (USTHB), Algeria), Samira Moussaoui (Université des Sciences et de la Technologie Houari Boumediene (USTHB), Algeria), Louiza Mansour (Université des Sciences et de la Technologie Houari Boumediene (USTHB), Algeria)

C. Calò (University of Salento, Italy), A. Lay-Ekuakille (University of Salento, Italy), P. Vergallo (University of Salento, Italy), C. Chiffi (Roam 2000 S. R. L., Italy), A. Trotta (Polytechnic of Bari, Italy), A. Fasanella (ETS SAS, Italy), A.M. Fasanella (ETS SRL, Italy)

Paolo Visconti (University of Salento, Italy), Daniele Romanello (Cavalera Sistemi s.r.l., Italy), Giovanni Zizzari (University of Salento, Italy), Vito Ventura (University of Salento, Italy), Giorgio Cavalera (Cavalera Sistemi s.r.l., Italy)

Alessandro Massaro (Italian Institute of Technology, Italy), Piero Adriano Massaro (University of Bari, Italy)

Ronghua Yu (North Dakota State University, USA), Qixin Zhou (North Dakota State University, USA), Yechun Wang (North Dakota State University, USA), Chao You (North Dakota State University, USA)

Claudio De Capua (Università ’Mediterranea’ di Reggio Calabria, Italy), Rosario Morello (Università ’Mediterranea’ di Reggio Calabria, Italy), Rosario Carbone (Università ’Mediterranea’ di Reggio Calabria, Italy)

Philippe Laurent (University of Liège, Belgium), Jean-François Fagnard (University of Liège, Belgium), Philippe Vanderbemden (University of Liège, Belgium)

Octavian Postolache (Instituto de Telecomunicações and Polytechnic Institute of Setúbal, Portugal), Pedro Girão (Instituto de Telecomunicações and Technical University of Lisbon, Portugal), Gabriela Postolache (Atlantica University, Portugal)

Sagarika Pal (National Institute of Technical Teachers’ Training and Research, Kolkata, India), Ramtanu Mukherjee (National Institute of Technical Teachers’ Training and Research, Kolkata, India), Sharmi Ganguly (National Institute of Technical Teachers’ Training and Research, Kolkata, India)

Marco Happenhofer (Vienna University of Technology, Austria), Joachim Fabini (Vienna University of Technology, Austria), Christoph Egger (Vienna University of Technology, Austria), Michael Hirschbichler (Vienna University of Technology, Austria)

Vinodkumar Jacob (M.A. College of Engineering, India), M. Bhasi (Cochin University of Science and Technology, India), R. Gopikakumari (Cochin University of Science and Technology, India)

N.K. Mandavgade (G.H. Raisoni College of Engineering, India), S.B. Jaju (G.H. Raisoni College of Engineering, India), R.R. Lakhe (Shreyas Quality Management System, India)