Journal Navigation
International Journal of Materials Forming and Machining Processes (IJMFMP)

International Journal of Materials Forming and Machining Processes (IJMFMP)

Editor-in-Chief: J. Paulo Davim (University of Aveiro, Portugal)
Indexed In: INSPEC and 3 more indices
Published: Semi-Annually |Established: 2014
ISSN: 2334-4563|EISSN: 2334-4571|DOI: 10.4018/IJMFMP
Out of print.
Journal Metrics
Submission to Acceptance: Approx. 4 - 8 Weeks
Acceptance to Publication: Approx. 11 - 15 Weeks
Acceptance Rate: 26%
Description & Scope
Description:
The International Journal of Materials Forming and Machining Processes (IJMFMP) is a refereed journal that publishes high quality articles with an emphasis on research and development in forming materials and machining processes. The formability and machinability of all materials is considered... Show More
Mission & Scope:
The mission of the International Journal of Materials Forming and Machining Processes (IJMFMP) is to provide a channel of communication to disseminate knowledge between academics and researchers and industry practitioners. This journal serves as a useful reference for academics, researchers, post-graduate students, mechanical, manufacturing, production, industrial, and materials engineers, as... Show More
Coverage:
  • Abrasive machining processes
  • Additive Manufacturing
  • Biomachining
  • Environmentally friendly machining technologies
  • Environmentally friendly materials forming
  • Extrusion and drawing
  • Forging
  • Forming and shaping ceramics and glasses
  • Forming and shaping plastics and composites
  • Hard part machining
  • High efficiency machining
  • High speed machining
  • Hydroforming
  • Incremental forming
  • Internet-based machining
  • Joining processes
  • Machining of composites
  • Metal casting
  • Metalworking fluids
  • Microforming
  • Nano and micromachining
  • Non-traditional machining processes (EDM, USM, LAM, etc.)
  • Powder metallurgy
  • Precision machining
  • Rolling
  • Sheet metal forming
  • Thermoforming
  • Traditional machining processes (turning, milling, drilling, etc.)
  • Wood and wood products machining
Editorial Board

Editorial Board

Associate Editors
Alokesh Pramanik, Curtin University, Australia
Aristomenis Antoniadis, Technical University of Crete, Greece
Kayaroganam Palanikumar, Sri Sairam Institute of Technology, India ORCIDhttps://orcid.org/0000-0003-1883-5105
Kevin Chou, University of Alabama, United States
Loredana Santo, University of Rome Tor Vergata, Italy
Nikolaos Vaxevanidis, School of Pedagogical & Technological Education (ASPETE), Greece
Prasanta Sahoo, Jadavpur University, India ORCIDhttps://orcid.org/0000-0002-1538-0646
Uday Dixit, Indian Institute of Technology Guwahati, India
Victor Songmene, École de Technologie Supérieure (ÉTS), Canada
Viktor Astakhov, Michigan State University, United States
Editorial Review Board
Aitzol Lamikiz, Universidad del Pais Vasco, Spain
Alakesh Manna, Deemed University, India
Alfonso Paoletti, University of L’Aquila, Italy
Angelos Markopoulos, National Technical University of Athens, Greece ORCIDhttps://orcid.org/0000-0002-3754-5202
Carlos Antonio, University of Porto, Portugal
Domnita-Florina Fratila, Technical University of Cluj-Napoca, Romania
Fabrizio Quadrini, University of Rome Tor Vergata, Italy
Inderdeep Singh, Indian Institute of Technology Roorke, India
M.S. Shunmugam, Indian Institute of Technology Madras, India
Murali Sundaram, University of Cincinnati, United States
Paulo Martins, University of Lisbon, Portugal
Pedro Rosa, University of Lisbon, Portugal
Roger SERRA, ENI Val de Loire, France
S. Basavarajappa, University B.D.T. College of Engineering, India
Surjya Pal, Indian Institute of Technology Kharagpur, India
Vishal Sharma, Dr. B. R. Ambedkar National Institute of Technology, India
Editorial Policy
IGI Global holds its journals to the highest ethical practices. View Full Editorial Policy
Latest Articles

As this journal is under the Hybrid Open Access model, authors can choose between Standard (Non-OA) publishing or Open Access publishing. Find the policies for the publishing models below:

  • Standard (Non-OA) Publishing: If the author chooses to publish under the Standard (Non-OA) model, the article will be published under a Green OA model and the copyright of their article will transfer to IGI Global under our Author Warranty and Transfer of Copyright Agreement. However, through Green OA, IGI Global supports a Fair Use Policy, enabling authors to Post the final typeset PDF (which includes the title page, table of contents and other front materials, and the copyright statement) of their chapter or article (NOT THE ENTIRE BOOK OR JOURNAL ISSUE), on the author or editor's secure personal website and/or their university repository site. See the Fair Use Policy for sharing allowances conducive to Green Open Access.
  • Open Access Publishing: If the author choses to publish under OA, the authors receive the Creative Commons Attribution 4.0 International (CC BY 4.0) licensing arrangement. The copyright for the work remains solely with the author(s) of the article. Others may distribute, remix, tweak, and build upon the work, even commercially, without asking prior permission from the publisher or author and so long as they credit the author for the original creation. All authors are required to sign an author's warranty stating that the materials are original and unpublished elsewhere. The journal will not publish any material that has been previously published elsewhere. Learn More

Article Processing Charges
This journal operates under the Hybrid Open Access model, allowing the author to choose between traditional, subscription-based publishing, or Open Access publishing.
Subscription-Based Publishing/Green Open Access: Article manuscripts require no Article Processing Charge (APC) and require authors to transfer the copyright of the manuscript to IGI Global. Manuscripts are published behind a paywall and must be purchased for use. See the Fair Use Policy for sharing allowances conducive to Green Open Access.
Open Access Publishing: Article manuscripts receive the Creative Commons Attribution 4.0 International (CC BY 4.0) licensing arrangement. The copyright for the work remains solely with the author(s) of the article. Others may distribute, remix, tweak, and build upon the work, even commercially, without asking prior permission from the publisher or author and so long as they credit the author for the original creation. A one-time Article Processing Charge (APC) of US $2,300 must be paid AFTER the manuscript has gone through the full double-blind peer review process and the Editor(s)-in-Chief at his/her/their full discretion has decided to accept the manuscript based on the results of the double-blind peer review process. Learn more about APCs here.
Open Access Funding: IGI Global recognizes that many researchers may not know where to begin when searching for OA funding opportunities. IGI Global recently launched an Open Access Funding Resources page for researchers to browse. This page provides a comprehensive list of OA funding sources available for researchers to secure funds for their various OA publications.
Archiving
All of IGI Global’s content is archived via the CLOCKSS and LOCKSS initiative.
Contact
All inquiries regarding IJMFMP should be directed to the attention of:

J. Paulo Davim, University of Aveiro, Portugal
Editor-in-Chief
International Journal of Materials Forming and Machining Processes (IJMFMP)
E-mail: pdavim@ua.pt