Welcome to the InfoSci Platform
Reference Hub5
Experimental System Identification, Feed-Forward Control, and Hysteresis Compensation of a 2-DOF Mechanism

Experimental System Identification, Feed-Forward Control, and Hysteresis Compensation of a 2-DOF Mechanism

Umesh Bhagat, Bijan Shirinzadeh, Leon Clark, Yanding Qin, Yanling Tian, Dawei Zhang
Copyright: © 2013 |Volume: 3 |Issue: 3 |Pages: 21
ISSN: 2156-1664|EISSN: 2156-1656|EISBN13: 9781466634138|DOI: 10.4018/ijimr.2013070101
Cite Article Cite Article

MLA

Bhagat, Umesh, et al. "Experimental System Identification, Feed-Forward Control, and Hysteresis Compensation of a 2-DOF Mechanism." IJIMR vol.3, no.3 2013: pp.1-21. http://doi.org/10.4018/ijimr.2013070101

APA

Bhagat, U., Shirinzadeh, B., Clark, L., Qin, Y., Tian, Y., & Zhang, D. (2013). Experimental System Identification, Feed-Forward Control, and Hysteresis Compensation of a 2-DOF Mechanism. International Journal of Intelligent Mechatronics and Robotics (IJIMR), 3(3), 1-21. http://doi.org/10.4018/ijimr.2013070101

Chicago

Bhagat, Umesh, et al. "Experimental System Identification, Feed-Forward Control, and Hysteresis Compensation of a 2-DOF Mechanism," International Journal of Intelligent Mechatronics and Robotics (IJIMR) 3, no.3: 1-21. http://doi.org/10.4018/ijimr.2013070101

Export Reference

Mendeley
Favorite Full-Issue Download

Abstract

Most of the micro/nano manipulation mechanisms and systems are commonly based on flexure-based monolithic structures, and are generally driven by piezoelectric actuators. In the presented work, experimental system identification, 1-DOF trajectory tracking with feed-forward control, and hysteresis compensation are investigated. An experimental research facility with laser interferometry-based sensing and measurement technique is established. System identification experiments were performed on a 2-DOF flexure-based mechanism to investigate its dynamics. The system identification procedure, experimental design, data acquisition, analysis and validation of the identified system are presented in details. A linear sine swept signal is applied to the system as an input and the corresponding response of the system is measured with laser interferometry-based sensing and measurement technique. The experimental results are used to evaluate the transfer function and the first natural frequency of the system in the X and Y axes. Experimental validation data is used to verify the accuracy of the identified model. Further, a feed-forward controller is established to track a 1-DOF smooth multiple-frequency trajectory. For hysteresis compensation, inverse PI (Prandtl–Ishlinskii) model is derived from classical PI model. The parameters of the inverse PI model is estimated and validated with the experimental data. Finally, inverse PI model is directly adopted as a feed-forward controller for hysteresis compensation of piezoelectric actuators.

Request Access

You do not own this content. Please login to recommend this title to your institution's librarian or purchase it from the IGI Global bookstore.