Welcome to the InfoSci Platform
Reference Hub5
Application of ANFIS for the Selection of Optimal Wire-EDM Parameters While Machining Ti-6Al-4V Alloy and Multi-Parametric Optimization Using GRA Method

Application of ANFIS for the Selection of Optimal Wire-EDM Parameters While Machining Ti-6Al-4V Alloy and Multi-Parametric Optimization Using GRA Method

Sandeep Kumar, S. Dhanabalan, C. S. Narayanan
Copyright: © 2019 |Volume: 11 |Issue: 4 |Pages: 20
ISSN: 1941-6296|EISSN: 1941-630X|EISBN13: 9781522565437|DOI: 10.4018/IJDSST.2019100105
Cite Article Cite Article

MLA

Kumar, Sandeep, et al. "Application of ANFIS for the Selection of Optimal Wire-EDM Parameters While Machining Ti-6Al-4V Alloy and Multi-Parametric Optimization Using GRA Method." IJDSST vol.11, no.4 2019: pp.96-115. http://doi.org/10.4018/IJDSST.2019100105

APA

Kumar, S., Dhanabalan, S., & Narayanan, C. S. (2019). Application of ANFIS for the Selection of Optimal Wire-EDM Parameters While Machining Ti-6Al-4V Alloy and Multi-Parametric Optimization Using GRA Method. International Journal of Decision Support System Technology (IJDSST), 11(4), 96-115. http://doi.org/10.4018/IJDSST.2019100105

Chicago

Kumar, Sandeep, S. Dhanabalan, and C. S. Narayanan. "Application of ANFIS for the Selection of Optimal Wire-EDM Parameters While Machining Ti-6Al-4V Alloy and Multi-Parametric Optimization Using GRA Method," International Journal of Decision Support System Technology (IJDSST) 11, no.4: 96-115. http://doi.org/10.4018/IJDSST.2019100105

Export Reference

Mendeley
Favorite Full-Issue Download

Abstract

The applications of artificial intelligence (AI) are becoming more popular and relevant research have been conducted in every field of engineering and science by using these AI techniques. Therefore, this research aims to examine the influence of wire electric-discharge machining (WEDM) parameters on performance parameters to improve the productivity with a higher surface finish of titanium alloy (Ti-6Al-4V) by using the artificial intelligent technique. In this experimental analysis, the Adaptive Network Based fuzzy Inference System (ANFIS) model has been highly-developed and the multi-parametric optimization has been done to find the optimal solution for the machining of the titanium superalloy. The peak current (Ip), taper angle, pulse on time (Ton), pulse of time (Toff) and the dielectric fluid flow rate were selected as operation constraints to conduct experimental trials. The surface roughness (SR) and MRR were considered as output responses. The influence on machining performance has been analyzed by an ANFIS model and the developed model was validated with the full factorial regression models. The developed models showed the minimum mean percentage error and the optimized parameters by the GRA method showed the considerable improvement in the process.

Request Access

You do not own this content. Please login to recommend this title to your institution's librarian or purchase it from the IGI Global bookstore.