Welcome to the InfoSci Platform
Reference Hub3
Turning SKD 11 Steel Using Silver Nanofluids With Minimum Quantity Lubrication

Turning SKD 11 Steel Using Silver Nanofluids With Minimum Quantity Lubrication

M. Naresh Babu, V. Anandan, M. Dinesh Babu, N. Muthukrishnan
Copyright: © 2021 |Volume: 11 |Issue: 3 |Pages: 22
ISSN: 2156-1680|EISSN: 2156-1672|EISBN13: 9781799862208|DOI: 10.4018/IJMMME.2021070105
Cite Article Cite Article

MLA

Babu, M. Naresh, et al. "Turning SKD 11 Steel Using Silver Nanofluids With Minimum Quantity Lubrication." IJMMME vol.11, no.3 2021: pp.74-95. http://doi.org/10.4018/IJMMME.2021070105

APA

Babu, M. N., Anandan, V., Babu, M. D., & Muthukrishnan, N. (2021). Turning SKD 11 Steel Using Silver Nanofluids With Minimum Quantity Lubrication. International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), 11(3), 74-95. http://doi.org/10.4018/IJMMME.2021070105

Chicago

Babu, M. Naresh, et al. "Turning SKD 11 Steel Using Silver Nanofluids With Minimum Quantity Lubrication," International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME) 11, no.3: 74-95. http://doi.org/10.4018/IJMMME.2021070105

Export Reference

Mendeley
Favorite Full-Issue Download

Abstract

The influence of lubrication has an effect on health, surroundings, and manufacturing regions. In the current analysis, the impact of turning parameters such as cutting speed, feed rate and cutting conditions on surface roughness (Ra), cutting temperature, tool wear, and chip morphology are examined on SKD 11 steel. The experiments were performed with Taguchi's L18 orthogonal-array. The significance of the investigation involved in comparing the effect of dry, oil machining, and nano lubricants with minimum quantity lubrication (MQL) in turning process. Additionally, simple additive weighting method (SAW) has been utilized to enhance the turning parameters in SKD 11 steel for improved machining performance. Results indicate that the use of nanoparticles as cutting fluids serve in reducing the surface roughness, cutting temperature, and wear on the tool.

Request Access

You do not own this content. Please login to recommend this title to your institution's librarian or purchase it from the IGI Global bookstore.