Compensation of Voltage Sags with Phase-Jumps through DVR with Minimum VA Rating Using PSO based ANFIS Controller

Compensation of Voltage Sags with Phase-Jumps through DVR with Minimum VA Rating Using PSO based ANFIS Controller

Anil Kumar Ramakuru, Siva G. Kumar, Kalyan B. Kumar, Mahesh K. Mishra
Copyright: © 2012 |Pages: 15
ISBN13: 9781466615922|ISBN10: 1466615923|EISBN13: 9781466615939
DOI: 10.4018/978-1-4666-1592-2.ch008
Cite Chapter Cite Chapter

MLA

Ramakuru, Anil Kumar, et al. "Compensation of Voltage Sags with Phase-Jumps through DVR with Minimum VA Rating Using PSO based ANFIS Controller." Innovations and Developments of Swarm Intelligence Applications, edited by Yuhui Shi, IGI Global, 2012, pp. 133-147. https://doi.org/10.4018/978-1-4666-1592-2.ch008

APA

Ramakuru, A. K., Kumar, S. G., Kumar, K. B., & Mishra, M. K. (2012). Compensation of Voltage Sags with Phase-Jumps through DVR with Minimum VA Rating Using PSO based ANFIS Controller. In Y. Shi (Ed.), Innovations and Developments of Swarm Intelligence Applications (pp. 133-147). IGI Global. https://doi.org/10.4018/978-1-4666-1592-2.ch008

Chicago

Ramakuru, Anil Kumar, et al. "Compensation of Voltage Sags with Phase-Jumps through DVR with Minimum VA Rating Using PSO based ANFIS Controller." In Innovations and Developments of Swarm Intelligence Applications, edited by Yuhui Shi, 133-147. Hershey, PA: IGI Global, 2012. https://doi.org/10.4018/978-1-4666-1592-2.ch008

Export Reference

Mendeley
Favorite

Abstract

Dynamic Voltage Restorer (DVR) restores the distribution system load voltage to a nominal balanced sinusoidal voltage, when the source voltage has distortions, sag/swell and unbalances. DVR has to inject a required amount of Volt-Amperes (VA) into the system to maintain a nominal balanced sinusoidal voltage at the load. Keeping the cost effectiveness of DVR, it is desirable to have a minimum VA rating of the DVR, for a given system without compromising compensation capability. In this regard, a methodology has been proposed in this work to minimize VA rating of DVR. The optimal angle at which DVR voltage has to be injected in series to the line impedance so as to have minimum VA loading on DVR as well as the removal of phase jumps in the three-phases is computed by the Particle Swarm Optimization (PSO) technique. The proposed method is able to compensate voltage sags with phase jumps by keeping the DVR voltage and power ratings minimum, effectively. The proposed PSO methodology together with adaptive neuro–fuzzy inference system used to make the DVR work online with minimum VA loading. The proposed method has been validated through detailed simulation studies.

Request Access

You do not own this content. Please login to recommend this title to your institution's librarian or purchase it from the IGI Global bookstore.