Welcome to the InfoSci Platform
Reference Hub1
Robotic CAM System Available for Both CL Data and NC Data

Robotic CAM System Available for Both CL Data and NC Data

Fusaomi Nagata, Sho Yoshitake, Keigo Watanabe, Maki K. Habib
Copyright: © 2013 |Pages: 12
ISBN13: 9781466642256|ISBN10: 1466642254|EISBN13: 9781466642263
DOI: 10.4018/978-1-4666-4225-6.ch015
Cite Chapter Cite Chapter

MLA

Nagata, Fusaomi, et al. "Robotic CAM System Available for Both CL Data and NC Data." Engineering Creative Design in Robotics and Mechatronics, edited by Maki K. Habib and J. Paulo Davim, IGI Global, 2013, pp. 265-276. https://doi.org/10.4018/978-1-4666-4225-6.ch015

APA

Nagata, F., Yoshitake, S., Watanabe, K., & Habib, M. K. (2013). Robotic CAM System Available for Both CL Data and NC Data. In M. Habib & J. Davim (Eds.), Engineering Creative Design in Robotics and Mechatronics (pp. 265-276). IGI Global. https://doi.org/10.4018/978-1-4666-4225-6.ch015

Chicago

Nagata, Fusaomi, et al. "Robotic CAM System Available for Both CL Data and NC Data." In Engineering Creative Design in Robotics and Mechatronics, edited by Maki K. Habib and J. Paulo Davim, 265-276. Hershey, PA: IGI Global, 2013. https://doi.org/10.4018/978-1-4666-4225-6.ch015

Export Reference

Mendeley
Favorite

Abstract

This chapter describes the development of a robotic CAM system for an articulated industrial robot from the viewpoint of robotic servo controller. It is defined here that the CAM system includes an important function that allows an industrial robot to move along not only numerical control data (NC data) but also cutter location data (CL data) consisting of position and orientation components. A reverse post-processor is proposed for the robotic CAM system to online generate CL data from the NC data generated for a five-axis NC machine tool with a tilting head, and the transformation accuracy about orientation components in CL data is briefly evaluated. The developed CAM system has a high applicability to other industrial robots with an open architecture controller whose servo system is technically opened to end-users, and also works as a straightforward interface between a general CAD/CAM system and an industrial robot. The basic design of the robotic CAM system and the experimental result are presented, in which an industrial robot can move based on not only CL data but also NC data without any teaching.

Request Access

You do not own this content. Please login to recommend this title to your institution's librarian or purchase it from the IGI Global bookstore.