Didar Yeskermessov

Didar Yeskermessov is a PhD in the specialty “6D072300-Technical Physics”, Acting Associate Professor of the Department of Physics, Faculty of Basic Engineering Training, D. Serikbayev East Kazakhstan Technical University Qualifications: - 6B072300-Technical Physics PhD – D. Serikbayev East Kazakhstan Technical University 2018; - 6M072300-Technical Physics MSc - D. Serikbayev East Kazakhstan Technical University 2014; - 5B072300-Technical Physics BSc - D. Serikbayev East Kazakhstan Technical University 2012. Internships: - MSc - Wroclaw Polytechnic University, Poland 2013; - PhD - Gdansk Polytechnic University, Poland 2016; - PhD - Wroclaw Polytechnic University, Poland 2016; - Program of Bolashak – University of Lincoln, United Kingdom 2022-23. Didar Yeskermessov is actively engaged in research work, is a highly qualified scientist in the field of materials science, condensed matter physics, analysis of patterns of formation of nanocrystalline coatings and films, studying the correlation of their structural-phase state and properties, modification of the surface of metals and alloys and technology for obtaining new materials. He is proficient in direct methods of materials and coatings research, as well as analytical research methods using TEM/SEM-EDX, AFM and XRD analyses.

Publications

Study of the Influence of Electrolytic-Plasma Treatment on the Tribological Properties of High-Speed Steel: High Temperature Testing of Nitrided Layers High-Speed Steel
Zarina Aringozhina, Bauyrzhan Rakhadilov, Didar Yeskermessov, Yerkezhan Tabiyeva, Waqar Ahmed. © 2023. 61 pages.
This chapter is devoted to experimental studies of changes in structural-phase blocks and tribological properties of combustion of layers of high-speed steels R6M5, R9, and R18...
Changes in the Structural-Phase State of Ferrite-Perlite Steel Under the Action of Electrolyte-Plasma Surface Quenching: Electrolytic-Plasma Surface Quenching of Steel Grade Two
Yerkezhan Tabiyeva, Bauyrzhan Rakhadilov, Gulzhaz Uazyrkhanova, Didar Yeskermessov, Zarina Aringozhina, Waqar Ahmed. © 2023. 53 pages.
This chapter presents an analytical review of literature sources devoted to research on the rapid heating of steels using various heat sources; in particular, on plasma surface...
Hard and Superhard Multicomponent Nitride Coatings Deposited Using Vacuum-Arc Evaporation: The Effects of Cr and Si on the Structure and Properties of the Nanostructured (Zr-Ti-Nb)N Coatings
Didar Yeskermessov, Zhanerke Toleukhanova, Zarina Aringozhina, Yerkezhan Tabiyeva, Waqar Ahmed. © 2023. 61 pages.
This chapter is devoted to experimental research on the investigated of the structural-phase, morphology, elemental composition, physical-mechanical, and tribological properties...
Electrolytic Plasma Treatment of Turkurite-Phase in High-Speed Steels: High Temperature Testing of Nitrided Layers High-Speed Steel
Zarina Aringozhina, Bauyrzhan Rakhadilov, Didar Yeskermessov, Yerkezhan Tabiyeva, Waqar Ahmed. © 2023. 18 pages.
Scanning electron microscopy (SEM), EBSD-analysis, and X-ray structure (XRD) analysis were used to investigate the microstructure, morphology, elemental composition, phase...
Detonation-Gun Spraying Technology for Multilayer Coatings: Obtaining Multilayer Coatings by the Detonation Spraying Method
Didar Yeskermessov, Nurgamit Kantay, Dauir Kakimzhanov, Bauyrzhan Rakhadilov, Akbota Apsezhanova, Waqar Ahmed. © 2023. 17 pages.
This study investigated the structural-phase, morphology, elemental composition, and tribological properties of coatings systems based on Al2O3, NiCr, and NiCr-Al2O3 fabricated...