Article Preview
TopIntroduction
Although the United Nations designated the 1990's as the International Decade for Natural Disaster Reduction (IDNDR), there was a global failure to reduce natural disaster impacts during that time (IFRC, 2001). Ultimately contributing to this trend are environmental degradation, rapid urbanization and social marginalization (McEntire, 1999), particularly in developing countries. The increasing number of disasters suggests that vulnerability to natural hazards is also rising and so equates to changing the geography of risk. By way of elaboration, more people are living in low-lying coastal zones, seismically hazardous areas and concentrated urban environments (Amendola et al., 2008; Briceño, 2004; Burton et al., 1993; El-Masri & Tipple, 2002). Vulnerable populations will be at increased risk, for example, as the geography and magnitude of hydrometerological hazards that are historically associated with some of the greatest disasters (Kondratyev et al., 2002) change with global climate (Smith, 2004; IPCC, 2007). Defining the geography of risk is of a major concern in general and in particular in developing countries, “where disasters jeopardize important social development goals such as addressing poverty, ensuring adequate food, water, and sanitation, and protecting the environment,” (Levy 2005, p.375). Because natural disasters have the greatest overall impact in developing countries (Alexander, 1995; Bui et al., 2000; IFRC, 2001), this is where geospatial information technologies (GIT) have the greatest potential to mitigate causalities.
The purpose of this paper is to examine the use of GIT for natural disaster management, with an emphasis on how these technologies, in particular free and open source GIS (FOS GIT) can be effectively utilized at the local level in developing countries. Although natural disasters cannot entirely be prevented, disaster losses (including human, environmental and infrastructure/personal property) can be minimized with effective disaster management – the process of mitigation, preparation, response and recovery. The field of disaster management has greatly benefited from recent advancements in computers and related information technologies. Geospatial information technologies (GIT), including geographic information systems (GIS), remote sensing (RS), global positioning systems (GPS) and Internet GIS (IGIS) are currently being employed in a variety of ways to support all phases of disaster management. Since “each phase is geographically related to where people, places, and things are spatially located” (Gunes & Kovel 2000, p. 136), the entire disaster management process can be significantly enhanced through the effective use of GIT (Goodchild, 2006). “Even though the natural processes (e.g., floods, earthquakes, landslides, etc.) that generate disasters might be fundamentally different, the techniques to assess and mitigate risk, evaluate preparedness, and assist response have much in common and can share and benefit from advances in geographic information science (GIScience) (e.g., data acquisition and integration; issues of data ownership, access, and liability; and interoperability).” (Radke et al. 2000, p. 15). We propose that currently available free and open source software (FOSS) can fulfill many GIT requirements needed to improve disaster management capacity at the local level. While FOSS can create additional challenges compared to commercial solutions (Camara & Onsrud, 2004), with a clear understanding of the barriers and benefits of FOSS from a developing world perspective, FOSS is a capable and effective alternative.