Journal Contents: International Journal of Surface Engineering and Interdisciplinary Materials Science (IJSEIMS)

Volume 9 (2021)
Issue 1
Article 1
Influence of Alumina Particles on Tribology of Autocatalytic Ni-P Coatings at High Temperature (pages 1-25)
Sanjib Kundu (Jadavpur University, India), Suman Kalyan Das (Jadavpur University, India), Prasanta Sahoo (Jadavpur University, India)
Article 2
Role of Heat Treatment on Hardness of Al 6061- AlB2 Metal Matrix Composites (pages 26-39)
Dayanand Samuel (Government Engineering College, Raichur, India), Satish Babu Boppana (Presidency University, Bengaluru, India), Kayaroganam Palanikumar (Sri Sairam Institute of Technology, India), Ramesh S. (Presidency University, Bengaluru, India), Virupaxi Auradi (Siddaganga Institute of Technology, Tumkur, India)
Article 3
Numerical Analysis of the Fluid Flow Behavior in the Plain Journal Bearing at Textured and Not Textured Surface (pages 40-59)
Bendaoud Nadia (Faculté de Génie Mécanique, Unversité des Scienes et de la Technologie d'Oran Mohamed Boudiaf, Algeria), Mehala Kadda (Faculté de Génie Mécanique, Unversité des Scienes et de la Technologie d'Oran Mohamed Boudiaf, Algeria)
Article 4
Capability Resurrection of DC Sputtering Machine: A Case Study (pages 60-76)
C. L. V. R. S. V. Prasad (GMR Institute of Technology, India), G. V. S. S. Sharma (GMR Institute of Technology, India), P. N. L. Pavani (GMR Institute of Technology, India)
Article 5
Experimental Investigation on the Effect Due to Mould Vibrations on Mechanical and Metallurgical Properties of Aluminum Alloy (A-1050) (pages 77-86)
Sujith Bobba (Vignan's Foundation of Science, Technology, and Research, India), Sambasiva Rao Mukkollu (National Insititue of Foundary and Forge Technology, India), Z. Leman (Universiti Putra Malaysia, Malaysia), Harish Babu Bachina (Vignan's University, India)
Article 6
Flexural Analysis of Epoxy Polymer Composite Reinforced With Sugarcane Fibre/Fly Ash/Carbon-Nanotube (pages 87-99)
Venkatachalam Gopalan (Vellore Institute of Technology, India), Rahul Vyas (Vellore Institute of Technology, India), Ishangiri Goswami (Vellore Institute of Technology, India), Abhi Shah (Vellore Institute of Technology, India), Vignesh Pragasam (Vellore Institute of Technology, India)
Issue 2
Volume 8 (2020)
Issue 1
Article 1
Hydrogen Storage Capacity in Ni/Pd@f-MWCNTS Decorated Graphene Oxide/Cu-BTC Composites at Room Temperatures: A Sustainable Cleaner Energy Production (pages 1-12)
Madhavi Konni (Vignan's Institute of Engineering for Women, Visakhapatnam, India), Manoj Kumar Karnena (GITAM (Deemed to be) University, Visakhapatnam, India), Saratchandra Babu Mukkamala (GITAM (Deemed to be) University, Visakhapatnam, India)
Article 2
Influence of Zinc Oxide Nanoparticles on the Optical, Dielectric and Electromagnetic Interference Shielding Performance of Polystyrene Films (pages 13-24)
B. J. Madhu (Post Graduate Department of Physics, Government Science College, Chitradurga, India), Mohammed Irfan (Department of Physics, Government Science College, Chitradurga, India), A. Manjunath (Post Graduate Department of Physics, Government Science College, Chitradurga, India), N. P. Divya (Department of Physics, Government Science College, Chitradurga, India), S. S. Mahesh (Department of Physics, Acharya Institute of Technology, Bangalore, India), B. Shruthi (Department of Chemistry, Dr. Ambedkar Institute of Technology, Bangalore, India)
Article 3
Optimization of Tribological Behavior of Mg-Wc Nanocomposites at Elevated Temperature (pages 25-43)
Sudip Banerjee (Jadavpur University, Kolkata, India), Suswagata Poria (Jadavpur University, Kolkata, India), Goutam Sutradhar (Department of Mechanical Engineering, Jadavpur University, Kolkata, India), Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Article 4
Wear Characteristics of Ni-WC Powder Deposited by Using a Microwave Route on Mild Steel: Microwave Cladding of Ni-WC (pages 44-54)
Hitesh Vasudev (Lovely Professional University, Phagwara, India)
Article 5
Elastic Behavior of the Plain Journal Bearing Coated With a Textured Surface and a Non-Textured Surface: Plain Journal Bearing at Textured Surface Behavior (pages 55-77)
Mehala Kadda (Unversité des Scienes et de la Technologie d'Oran Mohamed Boudiaf, Faculté de Génie Mécanique, Bir El Dijr, Algeria), Bendaoud Nadia (Unversité des Scienes et de la Technologie d'Oran Mohamed Boudiaf, Faculté de Génie Mécanique, Bir El Dijr, Algeria)
Issue 2
Article 1
Surface Effects on Engine Materials of Mineral Oil Dilution With Methyl Esters and Biodiesels (pages 1-18)
Gustavo J. Molina (Georgia Southern University, USA), Emeka F. Onyejizu (Georgia Southern University, USA), John L. Morrison (Georgia Southern University, USA), Valentin Soloiu (Georgia Southern University, USA)
Article 2
Nano-Scratch Response of Diamond-Like Carbon Film Deposited by Pulsed Direct Current Magnetron Sputtering (pages 19-37)
T. Koch (Institute of Materials Science and Technology, Vienna University of Technology, Austria), M. Lackner (Institute of Surface Technologies and Photonics, Joanneum Research Forschungsges m.b.H., Austria), A. Pauschitz (AC2T Research GmbH, Austria), Manish Roy (Defence Metallurgical Research Laboratory, India)
Article 3
Study of Dry Sliding Wear and Immersion Corrosion on Al 5083 Reinforced With MWCNT, MoB, and Ni (pages 38-51)
Sajeeb Rahiman (Karunya Institute of Technology, India), Robinson Smart (Karunya Institute of Technology, India)
Article 4
Experimental Analysis of Tribological Properties of Simarouba Glauca Biodiesel With Nanoparticles (pages 52-65)
Eknath Nivrutti Aitavade (Visvesvaraya Technological University, India), S. C. Kamate (Hirasugar Institute of Technology, India)
Article 5
Analyzing the Effect of B4C/Al2O3 on the Wear Behavior of Al-6.6Si-0.4Mg Alloy Using Response Surface Methodology (pages 66-79)
Vishnu Anil Kumar (Department of Mechanical Engineering, Amrita Vishwa Vidyapeetham, Amritapuri, India), Vaishnave Vinodkumar Vinod Kumar (Department of Mechanical Engineering, Amrita Vishwa Vidyapeetham, Amritapuri, India), Goutham S Menon (Department of Mechanical Engineering, Amrita Vishwa Vidyapeetham, Amritapuri, India), Sivcharan Bimaldev (Department of Mechanical Engineering, Amrita Vishwa Vidyapeetham, Amritapuri, India), Manu Sankar (Department of Mechanical Engineering, Amrita Vishwa Vidyapeetham, Amritapuri, India), Karthik V Shankar (Department of Mechanical Engineering, Amrita Vishwa Vidyapeetham, Amritapuri, India), Meera Balachandran (Department of Chemical Engineering and Materials Science, Amrita, India & School of Engineering, Amrita Vishwa Vidyapeetham, Coimbatore, India)
Volume 7 (2019)
Issue 1
Article 1
Mechanical Properties and Wear Behavior of Aluminum Grain Refined by Ti and Ti+B (pages 1-19)
Ahmad Omar Mostafa (Tafial Technical University, Tafilah, Jordan)
Article 2
Synergistic Effect of Micro and Nano Fillers on Mechanical and Thermal Behavior of Glass-Basalt Hybrid Nano Composites: Synergistic Effect of Fillers (pages 20-36)
Rudresh B M (Government Engineering College, K R PET, Krishnarajpet, India), Ravikumar B N (Bangalore Institute of Technology, Bangalore, India), Madhu D (Government Engineering College, Ramanagara, India), Lingesh B V (Bangalore Institute of Technology, Bangalore, India)
Article 3
Plasma Sprayed WC-12%Co-Coatings for TBC Applications on Diesel Engine Piston (pages 37-54)
Debasish Das (National Institute of Technology, Hamirpur, India), Rajeev Verma (Dr. B R Ambedkar National Institute of Technology, Jalandhar, India), Vipul Pathak (National Institute of Technology, Hamirpur, India)
Article 4
Attenuation Measurement of Lossy Coatings of Carbon for Ka-Band Helix TWT Applications (pages 55-61)
Vikas Kumar (Chaudhary Bansi Lal University, Bhiwani, Haryana, India)
Issue 2
Article 1
Treatment of Phosphoric Acid Sludge for Rare Earths Recovery I: Effect of Polymeric Flocculant Properties on Filtration and Recovery (pages 1-18)
Ghazaleh Allaedini (Florida Polytechnic University, Lakeland, USA), Patrick Zhang (Florida Polytechnic University, Lakeland, USA)
Article 2
Optimization of Fractal Dimension of Turned AISI 1040 Steel Surface Considering Different Cutting Conditions: Fractal Dimension of Turned Steel Surface (pages 19-33)
Arkadeb Mukhopadhyay (Heritage Institute of Technology, Kolkata, India), Manik Barman (Heritage Institute of Technology, Kolkata, India), Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Article 3
Parametric Optimization of Magnetic Abrasive Finishing Using Adhesive Magnetic Abrasive Particles (pages 34-47)
Palwinder Singh (BBSB Engineering College, Fatehgarh Sahib, Punjab, India), Lakhvir Singh (BBSB Engineering College, Fatehgarh Sahib, Punjab, India), Arishu Kaushik (BBSB Engineering College, Fatehgarh Sahib, Punjab, India)
Article 4
Study of Mechanical Properties and EMI Shielding Behaviour of Al6061 Hybrid Metal Matrix Composites (pages 48-63)
Ch Hima Gireesh (Gayatri Vidya Parishad College for Degree & P.G. Courses(A), Andhra Pradesh, India), Koona Ramji (Dr. B.R. Ambedkar University, Srikakulam, India), K.G Durga Prasad (Gayatri Vidya Parishad College for Degree & P.G. Courses (A), Andhra Pradesh, India), Budumuru Srinu (GITAM University, Visakhapatnam, India)
Volume 6 (2018)
Issue 1
Article 1
Tribological Response of Polyamide 66 and Polytetrafluroethylene (PA66/PTFE) Blends in Two Body Abrasion Through Multipass Condition (pages 1-16)
B. M. Rudresh (Government Engineering College, K R PET, Mandya District, India), B. N. Ravikumar (Bangalore Institute of Technology, Bangalore, India), D. Madhu (Government Engineering College, Ramanagara, India)
Article 2
Investigation of Nickel Coated Tool for Electrochemical Deburring of Al6082 (pages 17-31)
Satisha Prabhu (Pandit Deendayal Petroleum University, Gandhinagar, India), Abhishek Kumar (Pandit Deendayal Petroleum University, Gandhinagar, India)
Article 3
Investigation of Structural, Morphological and Electro-Optical Behavior of GO/rGO (pages 32-43)
Rashmi Chawla (YMCA University of Science and Technology, Faridabad, India), Poonam Singhal (Dcrust, Murthal, India), Amit Kumar Garg (Dcrust, Murthal, India)
Article 4
A Comparison of the Vibrational Responses of Four Different Uniform and Tapered Composite Beams (pages 44-58)
Padmanabhan Krishnan (SMBS, VIT- University, Vellore, India), K.K. Manchit Kumar (VIT, Vellore, India)
Issue 2
Article 1
Erosion-Corrosion Wear of Heat-Exchanger Materials by Water/Ethylene-Glycol/Alumina Nanofluids (pages 1-22)
Gustavo J. Molina (Georgia Southern University, Statesboro, USA), Fnu Aktaruzzaman (Georgia Southern University, Statesboro, USA), Valentin Soloiu (Georgia Southern University, Statesboro, USA), Mosfequr Rahman (Georgia Southern University, Statesboro, USA)
Article 2
Experimental Investigations on Wear Behavior of AA20204-Flyash-Nanostructured Redmud Hybrid Composites Synthesized by Stircasting (pages 23-35)
Anitha Santhoshi Madugula (Jntu Kakinada, Kakinada, India), B. Murali Krishna (Sri Sivani College of Engineering, Chilakapalem, India), G. Swaminaidu (Jntu Vizianagaram, Kakinada, India)
Article 3
Regression Modeling and Experimental Investigations on Ageing Behavior of Nano-Fly Ash Reinforced Al-10wt%Mg Alloy Matrix Composites (pages 36-49)
Srinivasa Prasad Katrenipadu (JNTUK UCEV, Vizianagaram, India), Swami Naidu Gurugubelli (JNTUK UCEV, Vizianagaram, India)
Article 4
Synthesis and Erosion Wear Analysis of Short Bamboo Fiber Reinforced Epoxy Composites Filled with Ceramic Fillers (pages 50-62)
Anu Gupta (Guru Jambheshwar University of Science & Technology, Hisar, India)
Volume 5 (2017)
Issue 1
Article 1
Tribological Behavior of Electroless Ni-P, Ni-P-W and Ni-P-Cu Coatings: A Comparison (pages 1-15)
Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India), Supriyo Roy (Jadavpur University, Kolkata, India)
Article 2
Tribologic Analysis, Wear Evolution and Torque Trend Estimation of an LSD Clutch Pack (pages 16-36)
Amedeo Tesi (University of Florence, Florence, Italy), Emanuele Galvanetto (University of Florence, Florence, Italy), Claudio Annicchiarico (University of Florence, Florence, Italy), Renzo Capitani (University of Florence, Florence, Italy)
Article 3
Tribology of Electroless Ni-P Coating Under Lubricated Condition: An RSM and GA Approach (pages 37-57)
Arkadeb Mukhopadhyay (Jadavpur University, Kolkata, India), Santanu Duari (Jadavpur University, Kolkata, India), Tapan Kr. Barman (Jadavpur University, Kolkata, India), Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Article 4
Development and Assessment of a New Flow-Through Test Instrument to Study Wear and Erosion Effects of Nanofluids (pages 58-74)
Gustavo J. Molina (Department of Mechanical Engineering, Georgia Southern University, Statesboro, GA, USA), Fnu Aktaruzzaman (Department of Mechanical Engineering, Georgia Southern University, Statesboro, GA, USA), Valentin Soloiu (Department of Mechanical Engineering, Georgia Southern University, Statesboro, GA, USA), Mosfequr Rahman (Department of Mechanical Engineering, Georgia Southern University, Statesboro, GA, USA), Kenshantis Martin (Department of Mechanical Engineering, Georgia Southern University, Statesboro, GA, USA)
Issue 2
Article 1
Effect of TiCN and AlCrN Coating on Tribological Behaviour of Plasma-nitrided AISI 4140 Steel (pages 1-17)
Santosh Vitthal Bhaskar (Research Scholar, AVCOE, Sangamner and Associate Professor, Mechanical Engineering Department, Sanjivani College of Engineering, Savitribai Phule Pune University, Kopargaon, India), Hari Narayan Kudal (SND College of Engineering and Research Center, Savitribai Phule Pune University, Yeola, India)
Article 2
Frictional Behavior of Aluminium MMC Foam Synthesized Using Dual Foaming Agent (pages 18-32)
Shamim Haidar (Department of Mechanical Engineering, Aliah University, Kolkata, India), Mukandar Sekh (Department of Mechanical Engineering, Aliah University, Kolkata, India), Joyjeet Ghose (Department of Production Engineering, Birla Institute of Technology, Ranchi, India), Goutam Sutradhar (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Article 3
Investigation of Influence of Quenching and Annealing on the Plane Fracture Toughness and Brittle to Ductile Transition Temperature of the Zinc Coated Structural Steel Materials (pages 33-42)
M. Ramesh (Department of Mechanical Engineering, University of Petroleum and Energy Studies, Dehradun, India), Rajnish Garg (Department of Mechanical Engineering, University of Petroleum and Energy Studies, Dehradun, India), Garimella V. Subrahmanyam (Department of Mechanical Engineering, University of Petroleum and Energy Studies, Dehradun, India)
Article 4
Design and Testing of a Jet-Impingement Instrument to Study Surface-Modification Effects by Nanofluids (pages 43-61)
Gustavo J. Molina (Department of Mechanical Engineering, Georgia Southern University, Statesboro, GA, USA), Fnu Aktaruzzaman (Department of Mechanical Engineering, Georgia Southern University, Statesboro, GA, USA), Valentin Soloiu (Department of Mechanical Engineering, Georgia Southern University, Statesboro, GA, USA), Mosfequr Rahman (Department of Mechanical Engineering, Georgia Southern University, Statesboro, GA, USA)
Volume 4 (2016)
Issue 1
Article 1
Adhesive Wear Based on Accurate FEA Study of Asperity Contact and n-Point Asperity Model (pages 1-24)
Ajay K. Waghmare (Department of Mechanical Engineering, Jadavpur University, Kolkata, India), Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Article 2
Reciprocating Friction and Wear Characteristics of Al Particulate Glass Epoxy Composites (pages 25-44)
Pujan Sarkar (Jadavpur University, Kolkata, India), Nipu Modak (Jadavpur University, Kolkata, India), Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Article 3
Hydrodynamic Behavior of the Sliding Surface with Semicircular Pores: Theoretical and MATLAB Considerations (pages 45-68)
Leonid Burstein (Kinneret Academic College, Tzamah, Israel)
Article 4
A Study of Ni & Cu Surface Status in a Supercritical Carbon Dioxide into a Microemulsion Using QCM (pages 69-81)
Sesik Kang (Department of Radiological Science, Catholic University of Pusan, Busan, South Korea), Minsu Ju (Dongnam Institute of Radiological & Medical Sciences, Busan, South Korea), Junghun Kim (Department of Radiological Science, Catholic University of Pusan, Busan, South Korea)
Issue 2
Article 1
Friction Force of the Sliding Surface with Pores Having a Semicircular Cross Section Form (pages 1-22)
Leonid Burstein (Kinneret Academic College, Tzamah, Israel)
Article 2
Preparation and Coefficient of Friction of YBa2Cu3O7-δ/Graphene Oxide Composites (pages 23-33)
Yanqiu Chu (School of Mathematics and Physics, Jiangsu University of Science and Technology and Jiangsu University, Zhengjiang, China), Jing Xu (Jiangsu University, Zhengjiang, China), Changsheng Li (Jiangsu University, Zhengjiang, China)
Article 3
Modeling and Analysis of the Mechanical Behavior of Dry Contracts Slipping Between the Disc and the Brake Pads (pages 34-62)
Ali Belhocine (Faculty of Mechanical Engineering, University of Sciences and the Technology of Oran, Oran, Algeria), Wan Zaidi Wan Omar (Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Johor, Malaysia)
Volume 3 (2015)
Issue 1
Article 1
Electrochemical Corrosion Behaviour of ZrN Film in Various Corrosive Fluid (pages 1-13)
Vishnu R. (Department of Materials Engineering, National Institute of Technology, Trichirapally, India), Jiten Das (Defence Metallurgical Research Laboratory, Hyderabad, India), S. B. Arya (Department of Metallurgical and Materials Engineering, National Institute of Technology, Suratkal, India), Manish Roy (Defence Metallurgical Research Laboratory, Hyderabad, India)
Article 2
Article 3
Tribological Relationship for Sintered Bearing Using Taguchi Technique (pages 48-57)
Priya Shekhar Gajjal (Department of Mechanical Engineering, Sinhgad College of Engineering, Pune, India), Geeta Lathkar (MGM'G College of Engineering and Technology, Nanded, India), Harijan Bagchi (College of Engineering, Pune, Pune, India)
Issue 2
Article 1
Wear Performance Optimization for Electroless Ni-P Coating (pages 1-17)
Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India), Suman Kalyan Das (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Article 2
Study of Hardness and Corrosion Resistance of Electroless Ni-P-TiO2 Composite Coatings (pages 18-40)
Prasanna Gadhari (Department of Mechanical Engineering, Jadavpur University, Kolkata, India), Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Article 3
Characterization of Cold Sprayed Copper Coatings on Al Alloy Substrate (pages 41-53)
Tarun Goyal (SUS College of Engineering and Technology, Mohali, India), T. S. Sidhu (Shaheed Bhagat Singh State Technical Campus, Ferozepur, India), R. S. Walia (Delhi Technological University, Delhi, India)
Article 4
Analysis of Surface Topography on Duplex Stainless Steel AISI 2205 for Deep Sea Applications (pages 54-68)
A. Vinoth Jebaraj (Panimalar Engineering College, Anna University, Chennai, India), L. Ajay Kumar (Anna University, Chennai, India), C. R. Deepak (National Institute of Ocean Technology, Chennai, India)
Volume 2 (2014)
Issue 1
Article 1
Epoxy-Matrix MMT-Filled Nanocomposite Coatings onto Aluminum Substrates (pages 1-14)
Fabrizio Quadrini (Department of Industrial Engineering, University of Rome “Tor Vergata”, Rome, Italy), Denise Bellisario (Department of Industrial Engineering, University of Rome “Tor Vergata”, Rome, Italy), Carmine Lucignano (Department of Industrial Engineering, University of Rome “Tor Vergata”, Rome, Italy), Loredana Santo (Department of Industrial Engineering, University of Rome “Tor Vergata”, Rome, Italy)
Article 2
Parametric Study and Optimization of Nd: YAG Laser Micro-Turning Process of Different Grade of Alumina Ceramics Based on Taguchi Methodology (pages 15-46)
G. Kibria (Department of Mechanical Engineering, Aliah University, Kolkata, India), B. Doloi (Department of Production Engineering, Jadavpur University, Kolkata, India), B. Bhattacharyya (Department of Production Engineering, Jadavpur University, Kolkata, India)
Article 3
Influence of Process Parameters on Microstructure of Friction Stir Processed Mg AZ31 Alloy (pages 47-58)
G. Venkateswarlu (Research Scholar, Department of Mechanical Engineering, NIT Warangal, Andhra Pradesh, India), M.J. Davidson (Assistant Professor, Department of Mechanical Engineering, NIT Warangal, Andhra Pradesh, India), G.R.N. Tagore (Department of Mechanical Engineering, NIT Warangal, Andhra Pradesh, India), P. Sammaiah (Department of Mechanical Engineering, S.R.Engineering College, Warangal, Andhra Pradesh, India)
Article 4
Evaluation of Operational Characteristics in a Large Thrust Bearing (pages 59-73)
Duriseti Venkata Srikanth (Department of Mechanical Engineering, Auroras' Engineering College, Hyderabad, India), K. K. Chaturvedi (BHEL (R&D), Vikasnagar, Hyderabad, India), A. Chenna Kesava Reddy (JNTUH, Kukatpally, Hyderabad, India)
Article 5
Fabrication and Tribological Properties of Al-Si/B4C Metal Matrix Composites (pages 74-84)
Sadineni Rama Rao (SVCET, RVS Nagar, Chittoor, Andrah Pradesh, India), G. Padmanabhan (Department of Mechanical Engineering, S.V. University College of Engineering, Tirupati, Andrah Pradesh, India), P.V. Chandra Shekar Rao (L.B.R College of Engineering, Mylavaram, Andrah Pradesh, India)
Issue 2
Article 1
Elastic-Plastic Adhesive Contact of Rough Surfaces Based on Accurate FEA Study Using N-Point Asperity Model (pages 1-22)
Ajay K. Waghmare (Department of Mechanical Engineering, Jadavpur University, Kolkata, India), Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Article 2
Taguchi Based Optimization for Micro Hardness of Cold Spray Coating Process (pages 23-33)
Tarun Goyal (Department of Mechanical Engineering, Shaheed Udham Singh College of Engineering and Technology, Mohali, India), T.S. Sidhu (Department of Mechanical Engineering, Shaheed Bhagat Singh State Technical Campus, Ferozepur Punjab, India), R.S. Walia (Department of Production and Mechanical Engineering, Delhi Technological University, Delhi, India)
Article 3
Optimization of Friction and Wear Properties of Electroless Ni-P-Al2O3 Composite Coatings (pages 34-52)
Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India), Prasanna Gadhari (Jadavpur University, Kolkata, India)
Article 4
Taguchi -Grey Based Optimization of Friction and Wear of Electroless Ni-P Coatings in Acidic Environment (pages 53-69)
Bikash Panja (Department of Mechanical Engineering, Jadavpur University, Kolkata, India), Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Volume 1 (2013)
Issue 1
Article 1
A Novel System for Analysis of Surface Profiles from 3-D Components Using the Dickinson Rotating Ring Contact Profiler (pages 1-12)
Matthew Dickinson (Institute of Nanotechnology and Bioengineering, School of Computing, Engineering and Physical Sciences, University of Central Lancashire, Preston, UK), Nathalie Renevier (Institute of Nanotechnology and Bioengineering, School of Computing, Engineering and Physical Sciences, University of Central Lancashire, Preston, UK), Waqar Ahmed (Institute of Nanotechnology and Bioengineering, School of Computing, Engineering and Physical Sciences, University of Central Lancashire, Preston, UK)
Article 2
Finite Element Based Unloading of an Elastic Plastic Spherical Stick Contact for Varying Tangent Modulus and Hardening Rule (pages 13-32)
Biplab Chatterjee (Department of Mechanical Engineering, Jadavpur University, Kolkata, India), Prasanta Sahoo (Department of Mechanical Engineering, Jadavpur University, Kolkata, India)
Article 3
Friction Coefficient and Wear Rate of Different Materials Sliding Against Stainless Steel (pages 33-45)
Dewan Muhammad Nuruzzaman (Faculty of Manufacturing Engineering, University Malaysia Pahang, Pahang, Malaysia), Mohammad Asaduzzaman Chowdhury (Department of Mechanical Engineering, Dhaka University of Engineering and Technology, Gazipur, Gazipur, Bangladesh)
Article 4
Investigations on Materials Used for Manufacturing the Rolling Rolls in Few Durability Experiments (pages 46-56)
Imre Kiss (Department of Engineering & Management, Faculty of Engineering-Hunedoara, University Politehnica of Timisoara, Hunedoara, Romania)
Article 5
Statistical Modeling and Analysis of Dry Sliding Wear of SiC Reinforced Aluminum MMCs (pages 57-70)
S. Rajesh (Department of Mechanical Engineering, S.R.K.R. Engineering College, Bhimavaram, Andhra Pradesh, India), A. Gopala Krishna (Department of Mechanical Engineering, University College of Engineering, JNTUK, Kakinada, Andhra Pradesh, India), P. Rama Murthy Raju (Department of Mechanical Engineering, S.R.K.R. Engineering College, Bhimavaram, Andhra Pradesh, India), M. Duraiselvam (Department of Production Engineering, National Institute of Technology, Tiruchirappalli, Tamil Nadu, India)
Issue 2
Article 1
Mold Production by Selective Laser Sintering of Resin Coated Sands (pages 1-13)
Loredana Santo (Department of Industrial Engineering, University of Rome “Tor Vergata”, Rome, Italy), Fabrizio Quadrini (Department of Industrial Engineering, University of Rome “Tor Vergata”, Rome, Italy)
Article 2
A Study on Cavitation Erosion Behavior of Different Metals in Biomass Fuel/Diesel Blend (pages 14-21)
Huiqiang Yu (Institute of Tribology, Hefei University of Technology, Hefei, China), Hu Wang (Institute of Tribology, Hefei University of Technology, Hefei, China), Hengzhou Wo (Institute of Tribology, Hefei University of Technology, Hefei, China), Yufu Xu (Institute of Tribology, Hefei University of Technology, Hefei, China), Xianguo Hu (Institute of Tribology, Hefei University of Technology, Hefei, China)
Article 3
An Experimental Investigation for Optimization of Ytterbium Fiber Laser Parameter during Machining of Al/5 Wt%Al2O3-MMC (pages 22-34)
Arindam Ghosal (Department of Mechanical Engineering, PEC University of Technology, Chandigarh, India), Alakesh Manna (Department of Mechanical Engineering, PEC University of Technology, Chandigarh, India), Aurn K. Lall (Department of Mechanical Engineering, PEC University of Technology, Chandigarh, India)
Article 4
Optimization of Electrochemical Grinding Parameters for Effective Finishing of Hybrid Al/(Al2O3+ZrO2) MMC (pages 35-45)
K.Z. Molla (Department of Mechanical Engineering, Punjab Campas, Chitkara University, Rajpura, Punjab, India), Alakesh Manna (Department of Mechanical Engineering, PEC University of Technology, Chandigarh, Punjab, India)
Article 5
Magnetic Fluid Lubrication of a Rough, Porous Composite Slider Bearing (pages 46-65)
N. D. Patel (Department of Mathematics, S.P. University, Vallabh Vidya Naga, Gujarat, India), G. M. Deheri (Department of Mathematics, S.P. University, Vallabh Vidya Naga, Gujarat, India), H. C. Patel (L.D. College of Engineering, Ahmedabad, Gujarat, India)
Micro and Nano-Scale Phenomena in Tribology
Book Review
J. Paulo Davim (Department of Mechanical Engineering, Campus Santiago, University of Aveiro, Aveiro, Portugal)